PM08-CAN Power Module 14S, 200A

Connector type

Contact Us

    Feature
    • Supports 2-14S & 200A Cont, 400A Burst
    • DroneCAN Communication Protocol
    • Small & Compact Design 
    • Two 5V Output with Independent BEC IC and Circuitry
    • Separated Sensor and BEC Board to Minimize Electrical Noise Interference
    • Galvanically Isolated Current Sensor IC (AEC-Q100 Grade 1 qualified)
    • High Accuracy Temperature Sensor for Temperature Monitor

    • High-Efficiency Aluminum Heat Dissipation Shell

    Specifications
    • Processor：STM32F405RG 168MHz 1024KB Flash  196KB RAM
    • Voltage input: 7~60.9V (2S~14S) 
    • Continuous current:200A
    • Burst current
      • 400A @ 25℃ 1 sec
      • 1000A @ 25℃ < 1 sec
    • Max current sensing: 376A
    • Voltage accuracy: ±0.1V 
    • Current accuracy: ±5%
    • Temperature accuracy:±1℃
    • Power port output: 5.3V/3A each port
    • Protocol: DroneCAN 
    • Operating temperature :-25℃~105℃
    • Firmware upgrade: Support
    • Calibration:  Support
    Pinout

    Interface Type
    • Power & CAN Port: Molex CLIK-Mate 2mm 6Pin
    • Battery IN/OUT Options:
      • XT90 Connectors
      • Tinned Wires
      • XT90 & Ring Terminals
    Status LED
    • Flashing quickly continuously: MCU is in the bootloader stage, waiting for firmware to be flash
    • Flashing quickly for 3 seconds, and then on for 1 second: Waiting for CAN connection
    • Flashing slowly (one-second intervals): CAN is successfully connected
    Mechanical Spec
    • Size: 45mm×41mm×26mm (Not Include Cable)
    • Weight: 185g (Include Cable)
    Reference Links
    • PX4 & Autopilot Setup Instruction
    • PM08CAN 3D CAD File Download
    • Power Module Dimension