M10 GPS

Connector Type

Contact Us

    The M10 GPS uses multi-constellation GNSS powered by u-blox M10 series, a concurrent GNSS receiver which can receive and track multiple GNSS systems. Owing to the multi-band RF front-end architecture all four major GNSS constellations, GPS,Galileo, GLONASS and BeiDou can be received concurrently.

    It also comes with the IST8310 compass, tricolored LED indicator, buzzer, and a safety switch. There are 3 different connectors options for different purposes. This module ships with a baud rate of 115200 5Hz.

    The high-gain 25 x 25 mm patch antenna provides excellent performance and the omnidirectional antenna radiation pattern increases flexibility for device installation. It features active circuitry for the ceramic patch antenna, rechargeable backup battery for warm starts.

    High-Speed Drone GPS Comparison

    This blog post put Holybro M10, M9N, F9P and Matek M10Q was put to an ultimate test to determine which GPS units could keep pace with a high-speed drone in acro mode while ensuring precision during RTL and autonomous missions.

     

    Specification

     Holybro M10 GPSHolybro M9N GPS
    GNSS ReceiverUblox M10Ublox M9N
    Number of Concurrent GNSSUp to 4 GNSSUp to 4 GNSS
    BeiDouBeiDou
    GalileoGalileo
    GLONASSGLONASS
    GPSGPS
    QZSSQZSS
    Frequency BandGPS L1GPS L1
    Galileo E1Galileo E1
    GLONASS L1GLONASS L1
    BeiDou B1BeiDou B1
    SBAS L1SBAS L1
    QZSS L1QZSS L1
    CompassIST8310IST8310
    Output ProtocolUBX (U-blox)UBX (U-blox)
    NMEANMEA
    Accuracy2.0m CEP1.5m CEP
    Nav. Update Rate Up to 25 Hz (single GNSS),Up to 25 Hz (4 concerrent GNSS)
    Up to 10 Hz (4 concurrent GNSS)
    GNSS Augmentation SystemEGNOS, GAGAN, MSAS and WAASEGNOS, GAGAN, MSAS and WAAS
    QZSS: L1SQZSS: L1S 
    Default Baud Rate115200115200
    Input Voltage 4.7-5.2V4.7-5.2V
    Port TypeJST-GH-10PJST-GH-10P
    Antenna25 x 25 x 4 mm ceramic patch antenna25 x 25 x 4 mm ceramic patch antenna
    Power consumptionLess than 200mA @ 5VLess than 200mA @ 5V
    Operating Temperature-40~80℃-40~80℃
    Dimensionφ50 x14.4 mmφ50 x14.4 mm
    Weight32g 32g 
    Cable Length26cm (42cm cable purchase separately)26cm (42cm cable purchase separately)
    OtherTri-color LEDTri-color LED
    Onboard BuzzerOnboard Buzzer
    Safety SwitchSafety Switch
    LNA MAX2659ELT+ RF AmplifierLNA MAX2659ELT+ RF Amplifier
    Rechargeable Farah capacitanceRechargeable Farah capacitance
    Low noise 3.3V regulatorLow noise 3.3V regulator

    PIN MAP

     

    Difference between the three cable options

    SKU12040 – Holybro M10 GPS (JST GHR1.25mm 10pin cable):
    • This option is the most common, it is used on the This connector can be used on Pixhawk Standard Flight Controller 10pin “GPS Module”or “GPS1” input port.
    SKU12042 – Holybro M10 Secondary GPS (JST GHR1.25mm 6pin cable):
    • This connector can be used on Pixhawk Standard Flight Controller 6pin“UART & I2C”or “GPS2” input port as secondary GPS. This GPS is also compatible with the Cube Flight Controller GPS2 Port.       
    SKU12041 – Holybro M10 GPS for Pix32 & Pixhawk1/2.4.6/2.4.8 (Molex1.25mm 6pin & 4pin &3pin cable):
    • These connectors are for “Switch”, “GPS”, and “I2C” input ports on the Pix32/Pixhawk1/Pixhawk 2.4.6/2.4.8

    Features

    • Newest Ublox 10th Gen GNSS
    • Fast & Accurate Positioning
    • High-gain 25*25*4mm antenna
    • IST8310 Compass
    • Internal Buzzer, Safety switch
    • Ultra Bright UI RGB LED
     

    Package Includes:

    • 1x M10 GPS Module
    • 1x Fixed Carbon Fiber GPS mount

    Reference Link:

     

    Spare Part & Accessories 

    • GPS Extended Length Cable