Tekko32 F4 Metal 4in1 65A ESC (AM32)

Contact Us

    F4 MCU @150Mhz / Metal-Cased MOSFET / PWM output: 16k ~96k PWM / 4~6S / AM32_Firmware

    The all new Tekko32 Metal is the first 4in1 ESC in the market to adapt the fast F4 MCU. Powerful & reliable metal-cased MOSFET 4in1 ESC with smooth control and quick response.

    Features:
    • New & faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)
    • PWM Frequency: 16k to 96k
    • Metal-cased MOSFET for excellent heat dissipation
    • Massive on-board capacitance for noise filtering at 2068uf
    • 3 oz copper PCB design to allow bigger current and better heat dissipation
    • Separate drive & control circuit, this broadens the current capability of the drive circuit while reducing the electrical interference to the control circuit.
    Specification:
    • Continuous Current: 65A x4
    • Burst Current: 75A x4
    • Supports 4-6S battery
    • Supports DShot 150/300/600/1200 & MultiShot/OneShot/Proshot/PWM etc.
    • ESC telemetry Supported
    • Onboard analog current sensor
    • No output BEC
    • AM32 firmware
    • 1000uf 35v capacitor included (highly recommended for 6s setup)
    • Amperage meter scale ratio: 180 
    • Dimensions: 43 x 44mm / Weight: 15.8g
    • Mounting holes: M4 30.5×30.5mm (M3 grommets included)
    Note:
    • Air flow for the ESC is very important if you want to run this 4in1 in high current.
    • The battery wire (from Lipo to 4in1 ESC) should be at least 12AWG and well soldered.
    Package Included
    • Tekko32 F4 Metal 4in1 65A ESC *1
    • M3 Anti-Vibration Silicone Grommet Insert *4
    • Electrolytic capacitor: 1000uF 35v *1
    • 8pin to 8pin 1mm pitch 65mm cable *1
    • 8pin to 8pin 1mm pitch 25mm cable *1
    Downloads:
    • Tekko32 F4 Metal 4in1 ESC(65A) SPEC
    Some Tips:
    • ESC Current Sensor Scale
    • AM32 ESC Firmware Overview
    PIN MAP

    Reference Link
    • AM32 ESC Firmware Overview 
    • AM32 ESC Configurator